FUTEK IPM600 (D610) Digital Display - Manual (Page 24)

3.CONNECTION
13
3-5. RS-232C Interface Connection
This connector connects the RS-232C.
Example of cabling
The following shows an example of connection between DTE-DTE terminals. This will
require modification depending on the equipment to be connected. For details, see the
instruction manual of the equipment to be connected.
Pin No. Signal name
1
2 TxD
3 RxD
4 DTR
5
6
7 GND
8
Case F.G.
Insert
6
7
8
5
4
2
1
3
Metal case
Fit the metal cases into the Din connector,
and cap with the plastic covers.
Plastic cover
Wire connection surface
Side view
Secure with
hardware
Case F.
TxD
RxD
DTR
GND
GND
DTR
TxD
RxD
CD
DSR
CTS
RTS
F.G
TCP8080-01-520 D-sub 9 pin
Personal computer
, etc.
Cabling diagram
CA371-232 (optional)