1-2. connector pin assignment, 1-3. cable, Connector pin assignment – FUTEK IPM600 (D610) Digital Display User Manual
Page 93: Cable
13.RS-232C INTERFACE
82
13-1-2. Connector Pin Assignment
This connector connects the RS-232C.
13-1-3. Cable
The following shows an example of connection between DTE-DTE terminals. This will
require modification depending on the equipment to be connected. For details, see the
instruction manual of the equipment to be connected.
* This connection diagram shows an example of connecting a DTE (data terminal
equipment) personal computer.
Use a straight cable for connecting a DCE (data circuit terminating equipment) such
as a modem.
* Before preparing a cable, check the connector shape and pin assignment of the
equipment to be connected again.
Pin No.
Signal name
1
2
TxD
3
RxD
4
DTR
5
6
7
GND
8
Case
F.G.
Case
F.
TxD
RxD
DTR
GND
GND
DTR
TxD
RxD
CD
DSR
CTS
RTS
F.G
TCP8080-01-520
D-sub 9 pin
Personal computer
, etc.
Cabling diagram
CA371-232 (optional)