Milestone Paxton Integration Component - Manual (Page 12)

XProtect Paxton Integration Plug-in User's Guide
www.milestonesys.com Page 12 Configuration
Remove mappings between doors and cameras.
You may remove the mapping between a specific door and camera by selecting the door in the item tree and then
click on the camera entry in the Related Devices list. Select the Delete option.
In case a door is removed from the Net2 configuration, you should also remove the whole door<->camera
mapping from the XProtect configuration. Select the door in the item tree, right-click it and select Delete. If the
camera is used in one or more event mappings the deletion must be confirmed.
Mapping of Net2 events to XProtect alarms
Net2 events may be received by the Milestone Paxton Integration Component and mapped to specific alarms in
the XProtect Event Server. The alarm will contain the information from the Net2 event together with video footage
from the cameras related to the event at and around the time of the event. The camera footage may be viewed by
opening the alarm or simply by the mouse cursor hovering above the alarm.
To enable the alarm generation, alarm definitions have to be created that will map the Paxton events to XProtect
alarms.
Locate the Alarm Definitions item in the item tree:
Figure 8: Location of the Alarm Definitions item node
Right-click the Alarm Definitions item node in the Management Client. Select the Create New option (or Add
New in XProtect Corporate) to open the Alarm Definition dialog:
Figure 9: Alarm Definition Dialog
Open the Triggering Event drop down box and click the event to trigger the alarm: