Milestone Paxton Integration Component - Manual (Page 31)

XProtect Paxton Integration Plug-in User's Guide
www.milestonesys.com Page 31 Using the Smart Client
Setting up alarm viewing
When, for example, a tampering event is received and has a matching alarm definition, an alarm indication is
displayed around the door icon and a new alarm appears in the Alarm List. It is possible to add an Alarm Preview
to the view and get the signal from the corresponding cameras there.
Figure 34: Smart Client Alarms
Figure 35: Door has been tampered with.
Notice that the door being in alarm state is propagated to the Net2 server and shown as a warning. Two separate
actions must be performed to quench both statuses. First, acknowledge the alarm by e.g. right-clicking the alarm
in the New section and choose Acknowledge. Secondly, turn off the alarm state in Net2 by either right-clicking the
door and choose Silence alarm or right-click the Paxton icon and choose Silence alarms.