Milestone Paxton Integration Component - Manual (Page 22)

XProtect Paxton Integration Plug-in User's Guide
www.milestonesys.com Page 22 Configuration
Figure 20: Ensuring that the user can both open and close doors in Enterprise.
If the user e.g. by default is to be granted access to the operation “Open door” on all doors, then check that
option.
When finished with this level, hit the OK button to save the settings.
If you want to alter the user’s access profile options for one specific door, then open the User Properties dialog
again as described above and expand the Paxton tree to select a specific door. Then de-select the option(s) that
the user should be denied access to.
When finished with this level, hit the OK button to save the settings.