Milestone Paxton Integration Component - Manual (Page 21)

XProtect Paxton Integration Plug-in User's Guide
www.milestonesys.com Page 21 Configuration
Access Control Profiling in Enterprise, Professional, Express, NVR
Potentially, several different types of users may have access to the XProtect server for different purposes. Some
of these users should only be allowed access to certain resources in the Paxton system and maybe only be
allowed to do some limited tasks. By means of the access control profiling function, specific users may be
restricted in their access to these resources.
To configure the access profiling do the following: In the left panel of the Administrator Application, expand Users
and double-click on a specific user to get to the User Properties dialog.
In the menu on the left side, click MIP Plug-in Authorization. Locate Paxton Integration and expand the tree
below.
Figure 19: Authorizing the user to control the server in Enterprise.
If users are to be able to configure and use the server, make sure that the Net2 Server has Manage and Read
checked. Click Paxton and see that manage and read rights are also checked here. For full access and control
every check box must be checked.
Next, click on the icon named Door to display the settings common to all doors.