ROTRONIC CF8-W-Disp-CO - Manual (Page 6)

Dokument
UMA 147 Rev
1 Page
6 (16)
Push Button Operation for CF8-W-Disp-CO
This sensor has two push buttons, MENU and ESC. The YELLOW LED will
acknowledge a successful push by a short flash. The push button MENU is available
for selection of display value or maintenance commands, whereas ESC is available
to escape back from a selected level.
Figure 6 The sensor with push buttons Figure 7 The push button MENU is pushed
Figure 8 The push button ESC is pushed Figure 9 The ENTER command is done by pushing
buttons MENU and ESC at the same time for
about 14 seconds
Display modes
In DISPLAY MODE the DEFAULT operation is that the sensor alternates between
carbon dioxide and carbon monoxide readings presentation. The push button
MENU(+) is used to select the indicated value on the display to be the error code or
ESC
MENU
ESC
MENU
ESC
MENU
ESC
MENU