Takagi T-H3M-IN/OS - Manual (Page 19)

19
Page
Installation
Installation Manual
<For rooftop terminations>
Exhaust and/or direct-vent sidewall terminations should
be at least 2 ft (610 mm) away from an opposite surface/
wall Do not place the termination directly in front of an
opening into a building 
Intake air Exhaust gas
3 ft (914 mm) min.
B
A
2 ft (610 mm) min.
Intake air
B
B
A
Exhaust
Gas
A:Exhaust terminations must be at least 1 ft  (305 mm) away from any obstructions
B:Intake terminations must be at least 1 ft  (305 mm) away from any obstructions
Exhaust
termination
2 ft (610 mm)
min
Please follow all local and national codes in regards to proper termination
clearances In the absence of such codes, the clearances above can be used as
guidelines Local codes supersede these guidelines
CAUTION