AT&T AT3111-2 - Manual (Page 22)

Telephone operation
18
Intercom
The intercom feature allows conversation
between handsets.
1. Press
INT to initiate the intercom feature.
2. The originating handset screen displays
INTERCOM TO:
3. Enter the number associated with the handset
you are trying to intercom.
4. The originating handset screen displays
CALLING HANDSET X.
The destination handset rings and displays
HANDSET X IS CALLING.
5. Press /FLASH, , INT or any dialing
keys ( 0-9,#,*) on the handset to answer the
intercom call.
6. To end an intercom call, press INT, OFF/
CLEAR
,
or place the handset back in the telephone
base or charger.
While on an intercom call
The telephone will beep if there is an outside call
during an intercom conversation, you can either:
Press
/FLASH or to end the intercom call
and answer the incoming call.
-OR-
Press
INT or OFF/
CLEAR
on the handset or FIND
HANDSET on the telephone base to disconnect
the intercom connection without answering the
incoming call. The incoming call will continue to
ring.
Intercom
NOTES:
• If the destination
handset does not answer
the intercom call, the
originating handset can
return to the external call
by pressing
/FLASH, or
OFF/
CLEAR
.
• If a call remains on hold
for about 100 seconds,
the originating handset
screen will display
UNABLE
TO CALL TRY AGAIN and
reconnect to the external
call automatically. The
destination handset returns
to idle mode.
CALLING
HANDSET X
HANDSET X
IS CALLING
INTERCOM TO: