AT&T AT3111-2 - Manual (Page 34)

30
Caller ID operation
To access the call log
• Press
CID .
-OR-
• Press MENU/
SELECT
from the idle mode.
• Press CID or to select >CALL LOG, then
press
MENU
/SELECT.
To review the call log
• When in the call log, press CID or to scroll
through the record.
• The name (if available), number, date and
time of all incoming calls are displayed on the
screen.
There will be an error tone when the list reaches
the top or the end of the call log.
Dial a call log entry
• When in the call log, press CID or to
scroll to the desired entry.
• Press # repeatedly to display the possible
dialing options.
• Press /
FLASH
or to dial the selected
entry.
Dialing options
Caller ID numbers may appear with an area code
that may not be required for local calls.
If the number displayed is not in the correct
format, you can change how it is dialed. Press
#
repeatedly to see different dialing options (you
can choose to dial with or without an area code,
with or without the 1). Press
/
FLASH
or
to dial when the number appears in the proper
format for your area.
The various dialing options are shown on the left.
555-0100
1-555-0100
908-555-0100
1-908-555-0100
Christine Smith
908-555-0100
3:45 AM 2/23
To review the call log
NOTE: Only one handset
can review the directory
or call log at a time. If
another handset
attempts to enter the
call log, it will display
NOT AVAILABLE AT
THIS TIME.
<CALL LOG
RINGER VOLUME