Setting the compressed file playback data, Displaying divx® disc information, Setting the video cd play mode – Alpine IVA-W505 User Manual

Page 36: Radio setup, Digital seek setting (hd radio mode only), Display setup, Display setup operation, Setting the compressed file playback, Data, Displaying divx

Advertising
background image

34

-EN

If a disc containing both a compressed video file and a compressed
audio file is used, you have a choose to play back only a video or only
audio.

Setting item: DVD PLAY MODE

Setting contents: AUDIO / VIDEO

Setting item: DivX INFO.

If [

] of DivX INFO. is touched, a DivX

®

file registered

code is displayed.

When playing a Playback Control (PBC) enabled Video CD, you can
choose to set PBC ON or OFF.

Setting item: PBC

Setting contents: OFF / ON

Digital SEEK Setting (HD Radio mode
only)

After carrying out the steps 1 to 3 of “To display the General mode
screen” explained on page 36, perform the operation described below.

1

Touch [SETUP] on the main source screen.

The SETUP selection screen is displayed.

2

Touch [SOURCE SETUP].

The SOURCE SETUP screen appears.

3

Touch [

] of RADIO SETUP.

The RADIO SETUP screen appears.

4

Touch [

] or [

] to select ON/OFF of DIGITAL

SEEK.

5

Touch [

] to return to the previous screen.

Touch and hold [

] for at least 2 seconds to return to the

main source screen that was displayed before the setup
operation was started.

Display Setup Operation

1

Touch [SETUP] on the main source screen.

The SETUP selection screen is displayed.

2

Touch [DISPLAY SETUP].

The DISPLAY SETUP screen appears.

3

Touch [

], [

] or [

] etc., of the desired item to

change its setting.

Setting items:

DIMMER / DIMMER LOW LEVEL / BACKGROUND /

AUTO BACKGROUND / DATA DOWNLOAD* /

BASE COLOR / SCREEN ALIGNMENT

* Refer to “Data Download” on page 41.

4

Touch [

] to return to the previous screen.

Touch and hold [

] for at least 2 seconds to return to the

main source screen that was displayed before the setup
operation was started.

Immediately after changing the settings of Display Mode (While the

system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.

Setting the compressed File Playback Data

AUDIO:

Only AUDIO data is played back.

VIDEO:

Only VIDEO data is played back.

Displaying DivX

®

Disc Information

Setting the Video CD Play Mode

OFF:

The PBC menu is not displayed.

ON:

The PBC menu is displayed.

RADIO Setup

ON:

SEEK UP/DOWN is used only for the digital radio station.

OFF: SEEK UP/DOWN is used for DIGITAL and ANALOG radio

stations. However, the strong signals have priority during
SEEK.

DISPLAY Setup

To display the Display mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.

1 Bring your vehicle to a complete stop at a safe

location. Engage the parking brake.

2 Keep pushing the foot brake and release the parking

brake once then engage it again.

3 When the parking brake is engaged for the second

time, release the foot brake.

For automatic transmission vehicles, place the transmission lever

in the Park position.

Now, the locking system for the Display mode operation has been
released. Engaging the parking brake can reactivate the Display
mode, as long as the car’s ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3) of “To
display the Display mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the Display mode screen.”

The following steps 1 to 4 are common operations to each
“Setting item” of DISPLAY Setup. Refer to each section for
details.

Advertising