Alpine IVA-W505 - Manual (Page 39)

37
-EN
Scroll display is available if CD text, folder name, file name or tag
information is entered.
Setting item: AUTO SCROLL
Setting contents: OFF / ON
• The display scrolls on the unit when the screen is filled up.
• Song, artist and album name, etc. scrolls when an iPod is connected.
• Short/Long Station name, Song, Artist, and album name scrolling are
displayed in HD Radio mode.
You can adjust the brightness of the button lighting at night with the
dimmer.
Setting item: LED DIMMER LEVEL
Setting level: -2 to +2
System Setup Operation
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [SYSTEM SETUP].
The SYSTEM SETUP screen appears.
3
Touch [ ] or [ ] etc., of the desired item to change
its setting.
Setting items:
IN INT. MUTE
*1
/ IN INT. ICON / REMOTE SENSOR
*2
/ CAMERA
IN / NAV. IN / NAV. MIX
*3
/ AUX IN / AUX IN LEVEL
*4
/ AUX IN
SIGNAL
*4
/ AUX OUT / BLUETOOTH IN / USB ADAPTER /
VISUAL KEY
*5
/ OPTION KEY / OPTICAL OUT / AUX+ IN /
AUX+ LEVEL
*6
*1
Displayed only when BLUETOOTH IN is OFF.
*2
When ON is set in “Setting the Picture Output” (page 39), the item is
displayed.
*3
When ON is set in “Setting the Navigation Mode” (page 38), the item
is displayed.
*4 Not displayed when OFF is set in “Setting the AUX Mode”
(page 38).
*5
Not displayed when OFF is set in “Setting the Navigation Mode”
(page 38).
*6
Not displayed when OFF is set in “Setting the AUX+ Mode”
(page 39).
4
Touch [ ] to return to the previous screen.
Touch and hold [ ] for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
• Immediately after changing the settings of System Mode (while the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
Setting the Scroll
OFF: Turns off the AUTO scroll mode. Scroll display is done
once as a track is changed.
ON: Turns on the AUTO scroll mode. Scroll display is
repeated as long as the mode is turned on.
Adjusting the Dimmer of Button Lighting at
Night
SYSTEM Setup
To display the System mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the System mode operation has been
released. Engaging the parking brake can reactivate the System
mode, as long as the car’s ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3) of “To
display the System mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the System mode screen.”
The following steps 1 to 4 are common operations to each
“Setting item” of SYSTEM Setup. Refer to each section for
details.