Alpine IVA-W505 - Manual (Page 69)

67
-EN
Select the desired Folder (Folder up/
down)
If you listen to a file from a selected folder, the folder can be changed.
Touch FOLDER [ ] or [ ] to select the folder.
Creating the playlist from the Artist/
Album information of the current song
When a song is played back, a playlist about all the songs with the same
Artist or Album stored in the USB memory or Portable audio player can
be created.
1
Touch [P1/2] when a song is played back.
The function guide changes.
2
Touch [X-RPT ARTIST] or [X-RPT ALBUM] to
create the playlist.
• According to the artist/album information of the current song, a
playlist about all the songs with the same artist/album of the BANK
are made into a playlist, which then starts to play back.
About MP3/WMA/AAC File of USB
Memory
Playing back MP3/WMA/AAC
MP3/WMA/AAC files are prepared, then stored to a USB
memory. Or, synchronize an MP3/WMA file using Windows
Media Player (Ver. 10 or 11), and then forward to the Portable
audio player. This unit can recognize at least 256 folders
(including root folder) and 10000 files per folder stored in USB
memory. Playback may not be performed if a USB memory/
Portable audio player exceeds the limitations described above.
Do not make a file’s playback time more than 1 hour.
Media supported
This device can play back USB memory/Portable audio player
media.
Corresponding File Systems
This device supports FAT 12/16/32 for USB memory device/
Portable audio player.
An iPod
®
can be connected to this unit.
iPod connection can be made in two ways using the USB connection
cable, or directly connecting the iPod using the FULL SPEED™
connection cable (KCE-422i).
When the IVA-W505 is connected by using the cable, the controls on
the iPod are not functional.
• Only 5th generation iPod, the first generation iPod nano and
the second generation iPod nano can be connected via a
USB device.
• Set AUX+ to OFF when an iPod is connected via the FULL
SPEED
TM
connection cable (refer to “Setting the AUX+
Mode” on page 39).
• If the Bluetooth Box and an iPod are connected at the same
time, be sure to disconnect the iPod from the Bluetooth Box
while turning ACC to OFF.
• To watch the video screen of the file in the Video iPod (fifth
generation iPod), using the USB connection and do the
operation as below.
Your vehicle must be parked with the ignition key in the ACC or ON
position. To do this, follow the procedure below.
1 Push the foot brake to bring your vehicle to a complete
stop at a safe location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 While the parking brake is being engaged the second
time, release the foot brake.
For automatic transmission vehicles, place the transmission lever in
the Park position.
About iPods usable with this unit
• The unit can be used with the fourth generation and above
iPod, iPod photo, iPod mini or the first, second generation
iPod nano only. However, future generation iPod compatibility
cannot be guranteed.
<USB connected>
Fifth generation iPod
First generation iPod nano
Second generation iPod nano
<Directly connected>
Fourth generation iPod
Fifth generation iPod
iPod photo
iPod mini
First generation iPod nano
Second generation iPod nano
• If the unit is used with iPod software versions of iTunes earlier
than 7.1.0.59, correct function and performance are not
guaranteed.
Playback
1
Touch [SOURCE] on the main source screen.
The SOURCE selection screen is displayed.
2
Touch [iPod] *
1 or [iPod-2] *
2 .
The display shows the iPod or iPod-2 mode screen.
*
1
Only when the iPod is connected by using the USB connector.
* 2 Only when the iPod is connected by using the iPod direct connector.
iPod
®
(Optional)