Alpine IVA-W505 - Manual (Page 46)

44
-EN
Adjustment Procedure for Dolby
Surround
Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
Adjustment procedure
In case of combining the Automatic adjustments etc.
We recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
Setting the A.PROCESSOR
1
Check that Defeat mode is off (page 26).
2
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
3
Touch [AUDIO SETUP].
The AUDIO SETUP screen appears.
4
Touch [ ] of A.PROCESSOR.
The A.PROCESSOR list screen appears.
5
Touch [ ] , [ ] or [ ] etc., of the desired item to
change its setting.
Setting items:
MEDIA XPANDER / BASS SOUND CONT. / DOLBY PLII/REAR
FILL / X-OVER / T.CORR / PHASE / G-EQ / P-EQ / SPEAKER
SELECT / MULTI CH SETUP / SPEAKER SETUP / DVD LEVEL /
PCM MODE
• Touching [ESC] will change to the main source screen.
• Touching [
] to return to the previous screen.
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to “AUTO” when the PXA-H700 is connected.
Setting item: MEDIA XPANDER
1
Select ON or OFF of MX by touching [ ] or [ ] of
MEDIA XPANDER.
2
Touch [ ] after setting to ON.
The MEDIA XPANDER setup screen appears.
3
Touch [ ] or [ ] of the desired MX mode.
• Music source (such as radio broadcasts and CDs, excluding AM
radio) level can be set.
MX CD (OFF, CD MX 1 to 3)
CD mode processes a large quantity of data. This data is used
to reproduce the sound cleanly by making use of the data
quantity.
MX CMPM (OFF, CMPM MX 1 to 3) / MX SAT (OFF, SAT MX 1 to 3)
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
MX FM (OFF, FM MX 1 to 3)
The medium to high frequencies become more clear, and
produces well balanced sound in all the bands.
1
2
3
4
5
6
7
Speaker Setup (page 49)
(Turning the speakers to be used on and off and
setting their response)
Adjusting the speaker levels (page 49)
(Adjusting the signal output level to the various
speakers)
Mixing bass sound to the rear channel
(page 48)
(Achieving smooth sound in the rear seat by mixing
the front audio signals with the rear speaker signals)
Adjusting the acoustic image (page 48)
(Adjusting the acoustic image to achieve a sound as
if the center speaker were directly in front of the
listener)
Achieving powerful high volume sound
(page 49)
(Achieving energetic sound with even greater power,
like the sound in a movie theater)
Adjusting the DVD Level (page 49)
(Adjust the volume (signal level) in the Dolby Digital,
Pro Logic II, DTS and PCM modes)
Storing Settings in the Memory (page 50)
(Storing all the settings and adjustments made on the
IVA-W505 (not only the above settings/adjusts) in the
memory)
Setting the MX Mode of the External Audio
Processor
OFF: Turns off the MX effect of every music source.
ON: Turns on the specified MX mode.