Brother MFC-J4610DW - Manual (Page 103)

Troubleshooting
89
B
Out of Memory The machine's memory is full. If a copy operation is in process:
Press and wait until the other
operations in progress finish, and then
try again.
The memory card or USB Flash
memory drive you are using does not
have enough free space to scan the
document.
Press .
Delete unused files from your memory
card or USB Flash memory drive to
make some free space and then try
again.
Paper Jam [Front] The paper is jammed in the machine. Remove the jammed paper by
following the steps in Paper is jammed
in the front of the machine on page 95.
Make sure the paper guides are set to
the correct paper size.
PaperJam Front,Rear The paper is jammed in the machine. Remove the jammed paper by
following the steps in Paper is jammed
in the front and back of the machine
on page 97.
Make sure the paper guides are set to
the correct paper size.
More than one sheet of paper was
placed in the manual feed slot.
—OR—
Another sheet of paper was placed in
the manual feed slot before the
Touchscreen showed
Put one piece of paper in
Manual Feed Slot, and then
press [OK].
Do not put more than one sheet of
paper in the manual feed slot at any
one time. Wait until the Touchscreen
shows
Put one piece of paper in
Manual Feed Slot, and then
press [OK]. before you feed the
next sheet of paper in the manual feed
slot.
Remove the jammed paper by
following the steps in Paper is jammed
in the front and back of the machine
on page 97.
Paper Jam [Rear] The paper is jammed in the machine. Remove the jammed paper by
following the steps in Paper is jammed
in the back of the machine
on page 96.
Make sure the paper guides are set to
the correct paper size.
Paper dust has accumulated on the
surface of the paper pick-up rollers. Clean the paper pick-up rollers.
(See Advanced User’s Guide:
Cleaning the paper pick-up rollers.)
Error Message Cause Action