Brother MFC-J4610DW - Manual (Page 32)

Chapter 2
18
b
Put envelopes in the paper tray with the
address side down. If the envelope flaps
are on the long edge, load the
envelopes with the flap on the left, as
shown in the illustration. Gently press
and slide the paper guides (1) to fit the
size of the envelopes.
NOTE
• If you are using envelopes with the flap on
the short edge, insert envelopes in the
paper tray as shown in the illustration.
• If you are using envelopes with the flap on
the short edge, close the paper support
flap.
If you have problems printing on
envelopes with the flap on the short edge,
try the following:
2
a
Open the envelope flap.
b
Put the envelope into the paper tray with
the address side down and the flap
positioned as shown in the illustration.
1