Brother MFC-J4610DW - Manual (Page 29)

Loading paper
15
2
NOTE
• If you are using paper that is 5.8  8.3 in.
or smaller, you must load the paper in
portrait orientation.
For more information, see Loading
smaller paper (Photo, Photo L and
envelopes) on page 16.
• If you want to add paper before the tray is
empty, remove the paper from the tray
and combine it with the paper you are
adding. Always fan the stack of paper well
before loading it in the tray. If you add
paper without fanning the stack, the
machine may feed multiple pages.
• For more information about paper
orientation, see Paper orientation and
capacity of the paper trays on page 32.
f
Gently adjust the paper guides (1) to fit
the paper.
Make sure the paper guides touch the
sides of the paper.
g
Check that the paper is flat in the tray
and below the maximum paper
mark (1).
Overfilling the paper tray may cause
paper jams.
h
Close the output paper tray cover.
i
Slowly push the paper tray completely
into the machine.
1
1