Brother MFC-J4610DW - Manual (Page 107)

Troubleshooting
93
B
Transferring the Fax Journal report to
another fax machine
B
If you have not set up your Station ID, you
cannot enter fax transfer mode. (See Quick
Setup Guide: Set your Station ID.)
a
Press to interrupt the error.
b
Press (Settings).
c
Press s or t on the Touchpanel to
display Service.
d
Press Service.
e
Press Data Transfer.
f
Press Report Trans.
g
Enter the fax number to which the Fax
Journal report will be forwarded.
h
Press Fax Start.
Document jam
(MFC-J4410DW and
MFC-J4610DW)
B
Documents can jam in the ADF unit if they are
not inserted or fed correctly, or if they are too
long. Follow the steps below to clear a
document jam.
Document is jammed in the top of the
ADF unit
B
a
Take out any paper from the ADF that is
not jammed.
b
Open the ADF cover.
c
Remove the jammed document by
pulling it upward.
1 ADF cover
d
Close the ADF cover.
e
Press .
IMPORTANT
To avoid future document jams, close the
ADF cover correctly by pressing it down in
the center.
1