Brother MFC-J4610DW - Manual (Page 130)

116
Machine Information
B
Checking the serial number
B
You can see the machine’s serial number on
the Touchscreen.
a
Press (Settings).
b
Press s or t on the Touchpanel to
display Machine Info.
c
Press Machine Info.
d
Press Serial No.
e
Press .
Reset functions
B
The following reset functions are available:
1 Network
You can reset the print server back to its
factory settings, such as the password
and IP address information.
2 Address&Fax
Address & Fax resets the following
settings:
 Speed Dial
(Speed-Dial and Setup Groups)
 Programmed fax jobs in the memory
(Polled Transmit, Delayed Fax and
Delayed Batch Transmission)
 Station ID
(Name and Number)
 Remote Fax Options
(Fax Forwarding and Paging)
 Report settings
(Transmission Verification Report,
Quick Dial List and Fax Journal)
 History
(Caller ID history and Outgoing Call)
 Faxes in memory
3 All Settings
You can restore all settings to their factory
settings.
Brother strongly recommends performing
this procedure before handing over or
disposing of the machine.
NOTE
Unplug the interface cable before you
choose Network or All Settings.
How to reset the machine
B
a
Press (Settings).
b
Press s or t on the Touchpanel to
display Initial Setup.
c
Press Initial Setup.
d
Press s or t to display Reset.
e
Press Reset.
f
Press s or t to display the types of
Reset options Network,
Address&Fax, and All Settings.
g
Press the reset option you want to use.
h
Press Yes to confirm.
i
Press Yes for 2 seconds to reboot the
machine.