Brother MFC-J4610DW - Manual (Page 22)

Chapter 1
8
3
The WiFi light is on when the network interface
is set to WLAN.
4 Power On/Off
Press to turn the machine on.
Press and hold down to turn the machine
off. The Touchscreen LCD will show
Shutting Down and will stay on for a few
seconds before turning itself off.
If you have connected an external telephone or
TAD, it is always available.
If you turn the machine off using , it will still
periodically clean the print head to maintain
print quality. To prolong the life of the print
head, provide better ink efficiency and maintain
print quality, you should keep your machine
connected to the power at all times.
1.8" Touchscreen LCD
1
The Touchscreen LCD shows the machine’s
status when the machine is idle.
1 Ink
Lets you see the available ink volume. Also,
lets you access the Ink menu.
will not appear if received faxes are in
the memory.
2 Fax
Lets you access Fax mode.
3 Copy
Lets you access Copy mode.
4 Settings
Lets you access the full Settings menu.
5 Scan
Lets you access Scan mode.
6 Web
Lets you connect the Brother machine to an
Internet service when you press t, and then
press .
For more information,
see the Web Connect Guide.
7 Photo
Lets you access Photo mode when you press
t
, and then press .
8 Receive Mode
Lets you see the current Receive Mode.
 Fax (Fax Only)
 F/T (Fax/Tel)
 TAD (External TAD)
 Mnl (Manual)
5
2 3
4
1
6
10 9
7
8