Brother MFC-J4610DW - Manual (Page 41)

Loading paper
27
2
Paper settings
2
Paper Size and Type
(MFC-J4310DW and
MFC-J4410DW)
2
Paper Type
2
To get the best print quality, set the machine
for the type of paper you are using.
a
Press (Settings).
b
Press s or t on the Touchpanel to
display General Setup.
c
Press General Setup.
d
Press s or t to display Paper Type.
e
Press Paper Type.
f
Press s or t to display Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or Transparency,
and then press the option you want to
set.
g
Press .
NOTE
The machine ejects paper with printed
surfaces face up onto the paper tray at the
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
Paper Size
2
You can use the following sizes of paper for
copies: Letter, Legal, Ledger, A4, A5, A3,
Executive and 4"
 6" (10  15 cm) and two
sizes for printing faxes: Letter or A4. When
you change the size of paper you load in the
machine, you will need to change the paper
size setting at the same time so your machine
can fit an incoming fax on the page.
a
Press (Settings).
b
Press s or t on the Touchpanel to
display General Setup.
c
Press General Setup.
d
Press s or t to display Paper Size.
e
Press Paper Size.
f
Press s or t to display Letter, A4,
A5, EXE or 4"x6", and then press the
option you want to set.
g
Press .
NOTE
When you copy using Ledger, Legal or A3
size paper, set the paper size option in
Copy mode.