Brother HL-8050N - Manual (Page 10)

IX
Important
A shielded interface cable should be used in order to ensure compliance with the limits for a Class B digital device.
Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user's authority to
operate the equipment.
Industry Canada Compliance Statement (For Canada Only)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Laser Notices
Laser Safety (100 - 127 V Model Only)
This printer is certified as a Class I laser product under the U.S. Department of Health and Human Services (DHHS)
Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means
that the printer does not produce hazardous laser radiation.
Since radiation emitted inside the printer is completely confined within protective housings and external covers, the
laser beam cannot escape from the machine during any phase of user operation.
FDA Regulations (100 - 127 V Model Only)
U.S. Food and Drug Administration (FDA) has implemented regulations for laser products manufactured on and
after August 2, 1976. Compliance is mandatory for products marketed in the United States. The label shown on
the back of the printer indicates compliance with the FDA regulations and must be attached to laser products
marketed in the United States.
Caution: Use of controls, adjustments or the performance of procedures other than those specified in this manual
may result in hazardous radiation exposure.
Internal laser radiation
Max. Radiation Power 5 mW
Wave Length 770 nm-800 nm
Laser Class Class IIIb (Accordance with 21 CFR Part 1040.10)
MANUFACTURED:
BROTHER INDUSTRIES, LTD.
15-1 Naeshiro-cho, Mizuho-ku, Nagoya, 467-8561 Japan
This product complies with FDA radiation performance standards, 21 CFR Subchapter J.