Brother HL-8050N - Manual (Page 26)

XXV
Never touch an area indicated by a high-temperature warning label (on or near the fuser
unit). Touching these areas may result in burns.
If a sheet of paper is wrapped around the fuser or rollers, do not use excessive force to
remove it so as to avoid injuries or burns. Turn off the printer immediately and call your
dealer or Brother Customer Service.
Do not place any heavy objects on the printer. An off-balance printer can fall over or the
heavy object can fall, resulting in injuries.
Do not use highly flammable sprays or solvents in or around the printer, as this can result
in fire.
When removing paper jams, make sure that no pieces of paper are left inside the printer,
as this can cause fire.
If the paper is wrapped around the fuser or roller, or you cannot see the jam that you are
trying to clear, do not attempt to remove the paper by yourself, as this may result in injuries
or burns. Turn off the printer immediately and call your dealer or Brother Customer Service.
Do not place magnetic objects near the safety switch of the printer. Magnets can activate
the printer accidentally, resulting in injuries.
Refer to this guide for procedures on clearing paper jams and how to resolve any other problems that
may occur.
Other Difficulties
CAUTION