Brother HL-8050N - Manual (Page 20)

XIX
Safety Precautions
To ensure the safe operation of your printer, make sure that you read this section thoroughly before use.
This section describes the conventions used in the guide.
Installing and Relocating your Printer
Do not place the printer in a hot, humid, dusty, or poorly ventilated environment. Prolonged
exposure to such adverse conditions can cause fire or electric shocks.
Do not place the printer near heaters or volatile, flammable, or combustible materials, such
as curtains.
Place the printer on a level, sturdy surface that can withstand the printer's weight. Failure
to do so could cause the printer to fall, resulting in injuries.
To prevent injuries, use two people when you lift this printer.
Indicates warning that must be observed to prevent possible personal injury.
Indicates caution that must be observed to use the printer properly or prevent
damage to the printer.
This symbol alerts you to procedures that require
close attention. Make sure that you read and follow the
instructions carefully.
This symbol alerts you to prohibited procedures.
Make sure that you read the instructions carefully.
This symbol alerts you to procedures that need to be
performed. Make sure that you perform the procedure
after reading the instructions carefully.
WARNING
CAUTION
High
temperature
Flammable Electrical
shock
Finger injure
Do not
touch
No naked/
open flame
Prohibited Do not
dismantle
Ground/Earth Remove the
plug
Hint
CAUTION