Brother HL-8050N - Manual (Page 82)

CONTROL PANEL 4 - 2
Buttons
You can control the basic printer operations and change various printer settings with nine buttons (Job
Cancel, Go,
Secure Print , +, -, Set, Back, Reprint, Menu).
Job Cancel Button
You can cancel the processing or printing of data with the Job Cancel button. The display shows JOB
CANCELLING
until the job is cancelled. After cancelling the job, the printer returns to the READY state.
When the printer is not receiving data or printing, the display shows NO DATA!!! and you cannot cancel
the job.
Go Button
You can change the panel indications from the current status (Menu, Error and Reprint settings) by
pressing the Go button once. For ERROR indications, the control panel only changes when the error is
cleared.
You can pause printing with the Go button. Pressing the Go button again restarts the print job and clears
the pause. During a pause, the printer is off-line.
If the printer is in PAUSE mode and you do not want to print the remaining data, you can cancel the
job by pressing the Job Cancel button. Once the job has been cancelled the printer will return to the
READY state.
Name Menu Screen
Job Cancel Stop and cancel the printing job in progress.
Go Exit from the control panel menu, reprint settings and error messages.
Pause and continue printing.
Secure Print Reprint the secure data.
+ Move forward through menus.
Move forward through the options you can choose.
- Move backward through menus.
Move backward through the options you can choose.
Set Select the control panel menu.
Set the selected menus and settings.
Back Go back one level in the menu.
Reprint Reprint the last job received.
Menu Go to the top menu (INFORMATION mode).