Brother HL-8050N - Manual (Page 99)

4 - 19 CONTROL PANEL
NETWORK
Menu Description
TCP/IP TCP/IP ENABLE ON/OFF
IP ADDRESS= ###.###.###
.### Enter the IP address.
SUBNET MASK= ###.###.###
.### Enter the Subnet mask.
GATEWAY= ###.###.###
.### Enter the Gateway address.
IP BOOT TRIES # Enter the number of times the print server
attempts to automatically obtain a TCP/IP
address.
IP METHOD AUTO/STATIC
/RARP/BOOTP
/DHCP You can choose the BOOT method that best
suits your needs.
APIPA ON/OFF Automatically allocates the IP address from
the link-local address range.
NETWARE NETWARE ENABLE ON/OFF Select ON to use the printer on a Netware
network.
NET FRAME AUTO/8023/
ENET/8022/
SNAP Lets you specify the frame type.
APPLETALK ON/OFF Select ON to use the printer on a Macintosh ®
network.
NETBEUI ON/OFF Select ON to use the NETBEUI protocol on
your network.
DLC/LLC ON/OFF Select ON to use the printer on a DCL/LLC
network.
NETBIOS/IP ON/OFF Select ON to use the printer on a Net BIOS/IP
network.
ENET AUTO/100B-FD/10B-FD Selects Ethernet link mode.