Interface, Reset menu, Interface -20 reset menu -20 – Brother HL-8050N User Manual
Page 100: Interface reset menu
CONTROL PANEL 4 - 20
INTERFACE
RESET MENU
Menu
Description
SELECT
AUTO/PARALLEL/USB/NETWORK
AUTO IF TIME
1:5:99
(sec)
You need to set the time-out period for the
auto interface selection.
INPUT BUFFER
LEVEL 1:3:15
Increase or decrease the input buffer
capacity.
PARALLEL
When using the parallel interface
HIGH SPEED
ON/OFF
Turns high-speed parallel communications
on or off.
BI-DIR
ON/OFF
Turns bi-directional parallel communications
on or off.
Menu
Description
RESET PRINTER
Resets the printer and restores all printer
settings (including command settings) to
settings you have previously made with the
control panel buttons.
FACTORY RESET
Resets the printer and restores all printer
settings (including command settings) to the
factory settings. See List of factory settings
on page 4-23.
PARTS LIFE
FUSER UNIT
Resets the fuser unit. See Replacing the
Fuser Unit & Transfer Roll Cartridge
(FP-8000) on page 6-5.