AltiGen comm AltiTouch 500 - Manual (Page 21)

AltiTouch 500 Manual 11
C H A P T E R 4
Phone Functions
Making a Call
1. Pick up the Handset or press the Speaker button, and listen for a dial
tone.
2. Using the Keypad, dial the desired telephone number. The number
you are dialing will appear on the display as you dial. When making a
call or talking on the phone, the “In Use” light will turn on, indicating
the phone is in use. This light will also be on whenever another phone
on the same phone line is in use.
Editing Telephone Number before Dialing
You can enter the telephone number you wish to dial before lifting handset
or pressing the Speaker button.
1. Use the keypad to enter the trunk access code (if applicable) and
telephone number. The number is displayed on the screen.
2. If you enter one or more wrong digits, press the " button one or more
times till incorrect digits are erased.
3. When all digits of a telephone number are entered, press the Dial/
Enter button. The speakerphone is activated and the telephone number
is dialed automatically.
Receiving a Call
1. When you hear the phone ring, simply pick up the handset from the
handset cradle. You may also press the Speaker button to answer the
call using the speakerphone.
2. When you are finished talking, replace the handset in the handset
cradle to end the call. If you have been talking using the speakerphone,
press the Speaker button to hang up. You may press the Goodbye
button to hang up at any time.