AltiGen comm AltiTouch 500 - Manual (Page 23)

AltiTouch 500 Manual 13
Receiving a Call Waiting Call
If single call waiting or multiple call waiting is enabled in the line and you
are on a call when another caller calls your phone number, you will hear a
“beep” indicating there is another call coming in.
To answer the waiting call and/or switch between calls:
1. Press and release the Flash button to put the current call on “hold” and
to answer the incoming call. To switch back and forth between the two
calls, press and release the Flash button.
2. When a Call Waiting call comes in, you may also hang up the current
call in order to pick up the waiting call. When you are on a call you
want to end and another call comes in, hang up the telephone. The
current call will be disconnected and after a temporary delay, the
phone will ring, allowing you to answer the waiting call.
Switching Between the Handset and the Speakerphone
To switch a call between the Handset and the Speakerphone during a
conversation:
1. While talking on the handset, press the Speaker button to activate the
speakerphone. The call can now be heard from the speakerphone.
2. While talking on the speakerphone, simply lift up the handset and the
call will be transferred to the handset and will no longer be heard on
the speakerphone.
3. Hang up the handset. Hanging up the handset will not disconnect the
call when the Speakerphone is activated. You must press the Speaker
or the Goodbye button to disconnect the call.
4. If the speakerphone is not activated, simply hang up the handset and
the call will be disconnected.
Switching Between the Headset and the Speakerphone
To switch between a call from the Headset to the Speakerphone during a
conversation:
1. While talking on the Headset, press the Speaker button to activate the
speakerphone. The call can now be heard from the speakerphone.
2. Press the Headset button if you wish to activate the headset.