AltiGen comm AltiTouch 500 - Manual (Page 28)

AltiTouch 500 Manual 18
1. Press the Directory button.
2. Press and hold the Delete button for four to five seconds until
“DELETE ALL?” appears. All entries in the directory are
permanently erased.
Storing a New Number and Name in the Memory Buttons
The AltiTouch 500 has 7 programmable memory buttons. (The first 3
buttons - Menu, Save and Delete - are customized and cannot be re-
programmed.)
To store a new number and name in the memory buttons:
1. Press the Save button when the display
shows no caller's number or name. The
“SAVE TO?” prompt appears on the
display.
2. Press the memory button where you
wish to store this telephone number
(e.g., M1). The “ENTER
NUMBER>” prompt appears on the
display.
3. Use the keypad to enter the telephone
number, including the trunk access
code and long distance prefix that you
need to dial this number. Insert a pause
or multiple pauses where required by
using the Pause button. Then press the Save button.
Note: If you need to dial an outside number, you will need to include
the trunk access code in the phone number you entered.
4. The third line of LCD alternately
displays the entered number and “USE
SAVE TO END.”
5. After saving the number, you are
prompted for name. Use the keypad to
input the first character of the name.
The number and letters on each
telephone button are displayed in turn.