Brother HL 1270N - Manual (Page 82)

7-4
2. Click on the appropriate print server and close the Chooser program. You should now be
able to print from the Macintosh.
✒ Note
If you cannot see the print server, first make sure that your cabling is correct and that you
have enabled EtherTalk from your Macintosh Network Control Panel. You may also need to
force the print server into the correct AppleTalk zone using the
SET APPLETALK ZONE
command described in Appendix A. You can also configure zone information using
BRAdmin32 from a PC, or by using a web browser.
Changing the Configuration
You may use Web Browser, TELNET, or Brother’s BRAdmin32 applications to change the
Print server AppleTalk name and default zone name. You can also disable AppleTalk
broadcasts. The procedure and commands are described in Appendix A. Note that name can
also be changed by using the (Apple LaserWriter Utility) Apple Printer Utility.