Windows nt 4.0 printer setup, Windows nt 4.0 printer setup 8-3 – Brother HL 1270N User Manual
Page 85
8-3
Windows NT 4.0 Printer Setup
1.
Log into Windows NT with administrative privileges. From the Start
menu, select Settings and then Printers.
2.
Select Add Printer (If you have already installed a Brother printer driver,
double click the printer driver that you wish to configure and then select
Printers/Properties, select the Ports tab and continue from Step 4
(ignoring steps 9-13) about installing the correct driver).
3.
Select My Computer and then click Next.
4.
Select Add a Port.
5.
Select Hewlett-Packard Network Port and then click New Port.
6.
A list of available print server MAC addresses (Ethernet addresses) appears
in the larger box under Card Address. Select the address of the desired
print server (you can see the Ethernet address on the printer configuration
page):
✒ Note
You can find the node name and MAC address by printing out the printer
configuration page. Refer to the Quick Setup Guide for information on how to
print the configuration page on your print server.