Brother HL 1270N - Manual (Page 84)

8-2
Configuring DLC on Windows NT
To use DLC on Windows NT, you must first install the DLC protocol.
1. Log into Windows NT with administrative privileges. Go to the NT Control
Panel and double click on the Network icon.
2. On Windows NT 3.5x systems, select Add Software. On Windows NT 4.0
systems, click on the Protocol tab, and click Add.
3. Select DLC Protocol and then OK. You will be asked for the location of
the files, for Intel based computers, the necessary files are stored in the
i386 directory of the Windows NT CD-ROM. If you have a non-Intel
platform, specify the correct directory on your Windows NT CD-ROM.
Click Continue (for 3.5x systems) or Close (for 4.0 systems).
4. Reboot your system to make the change take effect.