Using the mon. 1 and mon. 2 terminals, Using the mon. 1 and mon. 2 terminals 145, Cop y – Canon EOS C500 PL User Manual

Page 145

Advertising
background image

145

Connecting to an External Monitor

Using the MON. 1 and MON. 2 Terminals

During 4K and 2K modes, the camera can output video from the MON. 1 and MON. 2 terminals (MON.
terminals). The signal that is output from the MON. terminals also includes audio, time code, metadata and clip
name information. In addition, the camera can apply onscreen markers, zebra patterns, peaking and
magnification* to the MON. 1 terminal output. Perform the following procedures to enable output from the MON.
terminals and to adjust other related settings.

* Magnification will simultaneously be applied to the MON. 2 terminal output.

Enabling Output from the MON. Terminals

1 Open the [Output] submenu.

[

4K/2K/MXF Setup] > [MON. 1 & 2] > [Output]

2 Select [On] and then press SET.

• Output is enabled for the MON. terminals.

• If you do not intend to use the MON. terminals, select [Off]. Doing so

will also conserve the camera’s power.

Selecting the Resolution of the Output

When the resolution of the video configuration is [3840x2160],
[3840x1080] or [1920x1080], the resolution of the output is automatically
set to 1920x1080 so this procedure is not necessary.

1 Open the [Resolution] submenu.

[

4K/2K/MXF Setup] > [MON. 1 & 2] > [Resolution]

2 Select [2048x1080] or [1920x1080] and then press SET.

Selecting the Scan Mode of the Output

When the recording mode of the video configuration is [HRAW], [4K1K
RAW] or [

10-bit], this procedure is not necessary because this

function will be set automatically based on the resolution.

1 Open the [Scan Mode] submenu.

[

4K/2K/MXF Setup] > [MON. 1 & 2] > [Scan Mode]

2 Select [P] or [PsF] and then press SET.

Selecting the Resizing Method

When the recorded video and video output have a different aspect ratio,
perform the following procedure to select how the video is output.

1 Open the [Resize Output] submenu.

[

4K/2K/MXF Setup] > [MON. 1 & 2] > [Resize Output]

2 Select the desired option and then press SET.

Operating modes:

[

4K/2K/MXF Setup]

[

MON. 1 & 2]

[Output]

[On]

[

4K/2K/MXF Setup]

[

MON. 1 & 2]

[Resolution]

[1920x1080]

[

4K/2K/MXF Setup]

[

MON. 1 & 2]

[Scan Mode]

[P]

[

4K/2K/MXF Setup]

[

MON. 1 & 2]

[Resize Output]

[Letterbox]

COP

Y

Advertising
This manual is related to the following products: