Cop y – Canon EOS C500 PL User Manual
Page 176
Menu Options
176
[Bit Rate]: Displays the bit rate when set to [On].
[Resolution]: Displays the resolution when set to [On].
[Frame Rate]: Displays the frame rate when set to [On].
[Character Rec]: Displays the character recording warning icon (S) when set to [On], indicating that the
onscreen displays will be recorded on the clip.
[Output Display]: Displays the output display warning icon (T) when set to [On], indicating that the
onscreen displays will be output to an external monitor.
[Rec Command]: Displays the status of the recording command that is being output when [
4K/2K/MXF
Setup] > [Rec Command] is set to [On].
[User Memo]: Displays the user memo icon (Q) when set to [On], indicating that a user memo will be
recorded with a clip.
[User Bit]: Displays the user bit when set to [On].
[Audio Output CH]: Displays the audio output channel when set to [On].
[Audio Level]: Displays the audio level indicator and, if activated, the audio peak limiter icon (æ) when set to [On].
[Wi-Fi]: Displays the Wi-Fi icon („) when set to [On].
[Date/Time]: Displays the date and/or time.
[Metadata Display]: Displays the date and time of recording and/or the camera data (shutter speed, aperture
value, gain) during playback of an MXF clip.
[¤ TC/UB Setup] menu (
mode only)
1
Available during MXF mode only.
2
When the frame rate is a setting other than 29.97P, 59.94i or 59.94P, the time code is set to [NDF] and this setting cannot be changed.
[24P TC/Sync]: Determines the frequency for time code input and output and synchronization through the
GENLOCK terminal and SYNC OUT terminal (tri-level signal) when the frame rate is set to 23.98P or 24.00P.
[XF Legacy]: Synchronization mode compatible with Canon XF series camcorders. Synchronizes the time
code at a 30-frame signal and the signal from the GENLOCK terminal and SYNC OUT terminal at a 59.94i or
60.00i signal. The SYNC OUT terminal outputs a 59.94i or 60.00i signal.
[Normal]: Standard synchronization mode. Synchronizes the time code at a 24-frame signal and the signal
from the GENLOCK terminal and SYNC OUT terminal at a 23.98P or 24.00P signal. The SYNC OUT terminal
outputs a 23.98P/PsF or 24.00P/PsF signal.
[¤ User Bit Setup] menu (
mode only*)
* Not available in the [Photos] index screen or photo playback screen.
Menu item
Submenu
Setting options
A
[Time Code]
[Mode]
1
[Preset], [Regen.]
[Run]
1
[Rec Run], [Free Run]
[DF/NDF]
2
[DF], [NDF]
[Setting]
[Set], [Reset]
[TC In/Out]
[In], [Out]
[24P TC/Sync]
[XF Legacy], [Normal]
–
[User Bit]
[Rec Mode]
[Internal], [External]
[Output Mode]
[Fixed], [Pulldown]
[Type]
[Setting], [Time], [Date]
Menu item
Setting options
A
[Output Mode]
[Fixed], [Pulldown]
COP
Y