Canon XF105 - Manual (Page 126)

Audio Output
126
Audio Output
The camcorder can output audio from the HD/SD SDI terminal (b only), HDMI OUT terminal, AV terminal
or W (headphone) terminal. When audio is output from the AV terminal or W (headphone) terminal, you can
configure settings such as the output channel. When audio is output from the AV terminal, you can select the
output level.
b Embedded Audio
Embedded audio refers to the superimposing of the audio signal along with the video signal being output from
the HD/SD SDI terminal. If you set the [Video Setup]
[SDI Output] setting to [HD] or [SD], the camcorder will
automatically embed audio.
Synchronizing the Video with the Audio being Monitored
When audio is output from the AV terminal or W (headphone) terminal,
you can choose to synchronize the audio signal with the video signal or
have the camcorder output the audio in real time. When the audio is
output in real time, there will be a slight delay. Regardless of the setting,
however, the audio and video signals recorded will be synchronized.
1 Open the [Monitor Delay] submenu.
[m Audio Setup] [Audio Output] [Monitor Delay]
2 Select the desired option and then press SET.
Options
Selecting the Audio Channel
You can select the audio channel that is output from the AV terminal or W
(headphone) terminal.
1 Open the [Channel] submenu.
[m Audio Setup] [Audio Output] [Channel]
2 Select the desired option and then press SET.
Operating modes:
Operating modes:
[Line Out]: Synchronizes the audio and video signals.
[Normal]: Allows you to monitor the audio in real time.
Operating modes:
[m Audio Setup]
[Audio Output]
[Monitor Delay]
[Normal]
[m Audio Setup]
[Audio Output]
[Channel]
[CH1/CH2]
COP
Y