143). p, Cop y – Canon XF105 User Manual
Page 143
143
Menu Options
[ND Filter]: Allows the camcorder to control the ND filter automatically. When the ND filter is activated, the icon of
one of three available settings - 1/2 (NDu), 1/4 (NDw) and 1/8 (NDx) -will appear on the screen.
[Soft Zoom Control]: When this setting is activated, the zoom will start and/or stop gradually.
[Both]: Affects both when you start and when you stop zooming.
[Stop]: Affects only when you stop zooming.
[Start]: Affects only when you start zooming.
[Tele-converter]: Determines the operation of the digital tele-converter. When activated, the focal length of the
camcorder increases by a factor of approximately 1.5, 3 or 6, depending on the setting.
• The image is digitally processed, so the image resolution may deteriorate.
[Slow Shutter]: Activates the slow shutter for Infrared mode.
Custom picture
[X Edit File] settings
[Tele-converter]
[6.0x], [3.0x], [1.5x], [Off]
–
[Flicker Reduction]
[Automatic], [Off]
[Conversion Lens]
[TL-H58], [WD-H58W], [Off]
–
[Color Bars]
[Enable]
[On], [Off]
[Type]
[Type 1], [Type 2]
[Infrared]
[Monochrome]
[White], [Green]
[Light]
[Toggle], [Always On], [Always Off]
[Slow Shutter]
[On], [Off]
–
[Custom Picture]
[
X Select File]
Custom picture files in the camcorder and SD card.
[
X Edit File]
Refer to the following table for setting options and default values.
[
X Transfer File]
For custom picture files in the camcorder:
[Copy To
b], [Load From b]
For custom picture files on the SD card:
[Copy To Cam.], [Load From Cam.]
Menu item
Submenu
Setting options
0
[Rename]
[Protect]
[Unprotect], [Protect]
[Reset]
[Cancel], [OK]
[Gamma]
[Normal 1], [Normal 2], [Normal 3], [Normal 4],
[Cine 1], [Cine 2]
[Black]
[Master Pedestal]
-50 to 50 (0)
[Master Black]
[Red]
-50 to 50 (0)
[Green]
-50 to 50 (0)
[Blue]
-50 to 50 (0)
[Black Gamma]
[Level]
-50 to 50 (0)
[Range]
-5 to 50 (0)
[Point]
-1 to 50 (0)
[Low Key Satur.]
[Enable]
[Off], [On]
[Level]
-50 to 50 (0)
Menu item
Submenu
Setting options
0
COP
Y