Canon XF105 - Manual (Page 64)

Zooming
64
Using the Handle Zoom Rocker
Use the functions in the [l Camera Setup] [Zoom] submenus to set
the zoom speed.
Move the zoom rocker toward Q to zoom out (wide-angle) and
toward P to zoom in (telephoto).
Setting the Zoom Speed
Refer to the following table for approximate zoom speeds of the entire
zoom range (end to end).
1 Open the zoom [Speed Level] submenu.
[l Camera Setup] [Zoom] [Speed Level]
2 Select [Fast], [Normal] or [Slow] and then press SET.
3 Open the zoom [Handle Rocker] submenu.
[l Camera Setup] [Zoom] [Handle Rocker]
4 Select the desired level and then press SET.
• You can select [Off] if you do not intend to use the handle zoom
rocker.
Approximate zoom speeds (handle zoom rocker)
* When the zoom speed is too fast (approximately 2 seconds end-to-end), the camcorder will have more trouble focusing auto-
matically while zooming.
[Handle Rocker] setting
[Speed Level] setting
[Slow] [Normal] [Fast]
[1] (slowest) 4 min. 45 sec. 3 min. 1 min.
[16] (fastest) 4 sec. 3 sec. 2 sec.*
[l Camera Setup]
[ Zoom]
[ Speed Level]
[ Normal]
[l Camera Setup]
[ Zoom]
[Handle Rocker 8]
COP
Y