Canon XF105 - Manual (Page 61)

61
White Balance
Custom White Balance
You can store two custom white balance settings in the camcorder for
future use.
1 Press the WB button to select the F A or F B custom setting.
• The F A or F B appears next to the color temperature on the
screen. If another icon appears or no icon appears, press the button
again until the desired icon appears.
2 Point the camcorder at a white object so that it fills the whole
screen.
• Use the same lighting conditions you plan to use when recording.
3 Press the S button.
• The F A or F B icon will flash quickly.
• Make sure the white object fills the screen until the procedure is
completed.
• After the icon stops flashing, the procedure is completed. The setting is retained even if you turn off the
camcorder.
NOTES
• Set the [l Camera Setup] [Tele-converter] setting (0 143) to [Off] in advance.
• Readjust the custom white balance if the light source changes.
• Very rarely and depending on the light source, F may keep flashing (it will change to a slow flashing). The
result will still be better than with the auto white balance.
COP
Y