Avaya IP OFFICE EU24 - Manual (Page 33)

Function Key Programming Function Keys - Page 33
IP Office 2420 + EU24 User’s Guide Function Keys - Page 33
40DHB0002UKEG – Issue 4 (9th February 2004) Function Key Programming
CWOn - Call Waiting On
Switches call waiting for the extension on/off.
This function does not require any data entered when programmed. This function
cannot be programmed through the phone by the user.
The
CWOn key toggles call waiting on/off. When call waiting is on, CWOn is shown
with a symbol. When call waiting is on and the extension is on a call, any additional
call receives ringing rather than busy tone.
[User | Digital Telephony | Advanced | Call | Call Waiting On]
CWSus - Call Waiting Suspend
Suspend the current call at the exchange and answer the waiting call.
This function is not supported in the USA.
If no slot number is specified when the function is programmed, exchange slot 0 is
used. This function cannot be programmed through the phone by the user.
Pressing
CWSus is only supported if the exchange provides a Q.931 suspend call
facility.
[User | Digital Telephony | Advanced | Call | Call Waiting Suspend]
See also:
•
Resum - Resume Call on page 51.
DCW - Dial CW
Allows the user to force another extension to have call waiting mode on for the duration
of a call attempt. This function is not supported in the USA.
This function requires the target extension number to be entered when programmed.
That number is then shown next to DCW. This function cannot be programmed through
the phone by the user.
Normally, if the target extension is on a call and doesn't have call waiting on, any new
call will receive busy tone or be diverted to voicemail. Pressing
DCW will cause the
target extension to receive call waiting indication and allow the caller to hear ringing
until answered.
[User | Digital Telephony | Advanced | Dial | Dial CW]
See also:
•
Queue - Call Queue on page 49.
Dir - Directory (!)
Accesses the telephone system directory.
This function does not require any data entered when programmed. This function can
be programmed through the phone by the user using an
Admin key.
Pressing Dir displays a number of options.
• INDeX - Search for a matching extension user name on the telephone system.
• Group - Search for a matching group name on the telephone system.
• Extrn - Search for a name match in the telephone systems directory of external
numbers.
[User | Digital Telephony | Emulation | Directory]