Avaya IP OFFICE EU24 - Manual (Page 38)

Page 38 - Function Key Programming Function Keys
Page 38 - Function Keys IP Office 2420 + EU24 User’s Guide
Function Key Programming 40DHB0002UKEG – Issue 4 (9th February 2004)
FwNOn - Forward On No Answer On
Switches the extension to forward on no answer on.
This function does not required any data to be entered when programmed and cannot
be programmed through the phone by the user.
Pressing
FwNOn toggles the extension's forward on no answer state. When on,
FwNOn is shown with a symbol. When on, calls are forwarded to the extension's
forward on busy number (see FwBNo - Forward On Busy Number on page 37).
[User | Digital Telephony | Advanced | Forward | Forward On No Answer
On]
FwNOf - Forward On No Answer Off
Switches the extension to forward on no answer off.
This function does not required any data to be entered when programmed. This
function cannot be programmed through the phone by the user.
Pressing
FwNOf switches the extension's use of forward on no answer off.
Can also be used in conjunction with FwNOn - Forward On No Answer On on page 40.
[User | Digital Telephony | Advanced | Forward | Forward On No Answer
Off]
FwUOn - Forward Unconditional On
Switches the extension to forward all its calls except hunt group calls.
Note: When Call Appearance keys have been allocated, all the call appearance lines
must be in use before this function becomes active.
This function does not required any data to be entered when programmed. This
function cannot be programmed through the phone by the user.
Pressing
FwUOn toggles the extension's forward on busy state. When on, FwUOn
is shown with a symbol and the display includes a D. When on, calls are forwarded to
the extension's forward number (see FwBNo - Forward On Busy Number on page 37).
[User | Digital Telephony | Advanced | Forward | Forward Unconditional
On]
FwUOf - Forward Unconditional Off
Switches the extension’s forward unconditional off.
This function does not required any data to be entered when programmed. This
function cannot be programmed through the phone by the user.
Pressing
FwUOf switches the extension's use of forward unconditional off. Can
also be used in conjunction with FwUOn - Forward Unconditional On on page 40.
[User | Digital Telephony | Advanced | Forward | Forward Unconditional
Off]
GrpPg - Group Paging (!)
This function can be programmed with or without a target extension or group number.
This function can be programmed through the phone by the user using an
Admin
key.
If programmed with a target number, the
GrpPg key displays that number. When
GrpPg is pressed, it will make a paging call to that number.
If programmed without a target number, the number must be dialed after the user
presses
GrpPg.
[User | Digital Telephony | Emulation | Group Paging]