Avaya IP OFFICE EU24 - Manual (Page 28)

Page 28 - Function Key Programming Function Keys
Page 28 - Function Keys IP Office 2420 + EU24 User’s Guide
Function Key Programming 40DHB0002UKEG – Issue 4 (9th February 2004)
Display Key Features
This section lists the features that can be programmed against and Function
Keys. Both the shorthand and longhand names are shown. The shorthand name is the
name that is displayed next to the programmed key, along with any data programmed
for the feature.
Those functions marked with a (!) or an (#) can be programmed by the 2420 user. This
programming requires the phone to already have a soft key assigned to the Admin (for
! functions) and/or to Admin1 (for # functions). See Function Key Programming on
page 25 for lists of Admin and Admin1 functions.
All of the following functions can be programmed onto your 2420 by your System
Administrator. The command path is shown, for example:
[User | Digital Telephony | Emulation | Directory].
Dial (#)
Automatically dials the displayed number.
This function requires entry of the number to dial when programmed. The number is
then displayed next to the
key. This function can be programmed through the
phone by the user using an Admin 1 key.
Pressing the Dial key dials the associated number.
[User | Digital Telephony | Dial]
See also:
•
AD - Abbreviated Dial (!) on page 30.
• Prog - Abbreviated Dial Program (!) on page 49.
Group (#)
Answer or clear calls ringing a specific group.
This function requires entry of the group number (allocated by your System
Administrator). When programmed, the group name is then displayed next to the
key. This function can be programmed through the phone by the user using an
Admin 1 key and the group number.
A appears against the group when calls to that group are ringing. Pressing
displays details of one of those calls and options to drop (Drop ) the call, answer
the call (Answn ) or exit the group monitor ( EXIT).
[User | Digital Telephony | Group]
User (#)
See the status of a specific user, call that user and pick-up calls to that user.
When programmed by your System Administrator (on the IP Office), the user name is
entered. That name is then displayed next to the
key. This function can also be
programmed through the phone by the user using an Admin 1 key and then the
user number. Pressing the key calls the user.
The when the user is called the user name is underlined with a symbol beside it.
Press the
key next to the name. DkPickup appears against a call appearance key.
To pick up the call press this key.
If the System Administrator has setup group monitoring of the same user, pressing the
user key when the user is busy on a call displays several options. These are Drop
(end the user's call), Listn (listen to the call), and Aquir (takeover the call). If the
System Administrator has not setup group monitoring, then the options shown are Call,
Message, Vmail and CallB.
[User | Digital Telephony | User]