Canon PowerShot G16 - Manual (Page 115)

115
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Choosing Images Individually
1 Choose [Select].
z z Following step 2 in “Choosing a Selection
Method” ( = 114 ), choose [Select] and
press the < m> button.
2 Choose an image.
z z Once you choose an image following
step 2 in “Choosing Images Individually”
( = 112 ), [ ] is displayed.
z z To cancel selection, press the < m>
button again. [ ] is no longer displayed.
z z Repeat this process to specify other
images.
3 Erase the image.
z z Press the < n> button. A
confirmation message is displayed.
z z Press the < q><r> buttons or turn the
< 7> dial to choose [OK], and then press
the < m> button.
Selecting a Range
1 Choose [Select Range].
z z Following step 2 in “Choosing a Selection
Method” ( = 114 ), choose [Select
Range] and press the < m> button.
2 Choose images.
z z Follow steps 2 – 3 in “Selecting a Range”
( = 112 ) to specify images.
3 Erase the images.
z z Press the < p> button to choose [Erase],
and then press the < m> button.
Specifying All Images at Once
1 Choose [Select All Images].
z z Following step 2 in “Choosing a Selection
Method” ( = 114 ), choose [Select All
Images] and press the < m> button.
2 Erase the images.
z z Press the < q><r> buttons or turn the
< 7> dial to choose [OK], and then press
the < m> button.