Canon PowerShot G16 - Manual (Page 43)

43
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Overwriting and Adding Face Information
You can overwrite existing face information with new face info. You should
update face information regularly, especially with babies and children, as
their faces change quickly as they grow.
You can also add face information when all 5 face info slots have not been
filled.
1 Access the [Add Face Info]
screen.
z z Following step 1 in “Registering Face ID
Information” ( = 39 ), choose [Add Face
Info] and press the < m> button.
2 Choose the name of the person
whose face info you want to
overwrite.
z z Press the < o><p><q><r> buttons or
turn the < 7> dial to choose the name
of a person whose face info you want
to overwrite, and then press the < m>
button.
z z If five items of face info have already
been registered, a message will be
displayed. Choose [OK] (either press the
< q><r> buttons or turn the <7> dial),
and then press the < m> button.
z z If less than five items of face info are
registered, go to step 4 to add face
information.
3 Choose the face info to
overwrite.
z z Press the < o><p><q><r> buttons or
turn the < 7> dial to choose the face info
to overwrite, and then press the < m>
button.
4 Register face information.
z z Follow step 2 in “Registering Face ID
Information” ( = 40 ) to shoot, and then
register the new face information.
z z Registered faces are more easily
recognized if you add a variety of face
information. In addition to a head-on
angle, add a slight side angle, a shot
when smiling, and shots inside and
outside.
• You cannot add face information if all 5 information slots are filled. Follow the
steps above to overwrite face information.
• You can follow the above steps to register new face info when there is at least
one slot open; however, you cannot overwrite any face information. Instead
of overwriting face info, first erase unwanted existing info ( = 42 ), and then
register new face information ( = 39 ) as needed.