Canon PowerShot G16 - Manual (Page 136)

136
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
4 Choose [Add a Device].
z z Press the < o><p> buttons or turn the
< 7> dial to choose [Add a Device], and
then press the < m> button.
5 To connect to a smartphone or
printer:
Choose [Switch Network].
z z When the [Waiting to connect] screen
is displayed ( = 139 ), choose [Switch
Network] (either press the < q><r>
buttons or turn the < 7> dial), and then
press the < m> button.
6 Choose [WPS Connection].
z z Press the < o><p> buttons or turn the
< 7> dial to choose [WPS Connection],
and then press the < m> button.
7 Choose [PBC Method].
z z Press the < o><p> buttons or turn the
< 7> dial to choose [PBC Method], and
then press the < m> button.
8 Establish the connection.
z z On the access point, hold down the WPS
connection button for a few seconds.
z z On the camera, press the < m> button.
z z The camera will connect to the access
point.
z z If you have selected [ ], [ 2], or [ ] in
step 3, devices connected to the access
point are listed on the [Select a Device]
screen displayed next.
z z If you have selected a Web service in
step 3, go to step 11.
9 To connect to a smartphone,
printer, or computer:
Choose the target device.
z z Press the < o><p> buttons or turn the
< 7> dial to choose the computer name,
and then press the < m> button.
z z If you have selected a smartphone,
printer, or Macintosh computer, go to
step 11.