Canon PowerShot G16 - Manual (Page 186)

186
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
No AF frames are displayed and the camera does not focus when the
shutter button is pressed halfway.
• To have AF frames displayed and the camera focus correctly, try composing the
shot with higher-contrast subject areas centered before you press the shutter button
halfway. Otherwise, try pressing the shutter button halfway repeatedly.
Subjects in shots look too dark.
• Raise the flash and set the flash mode to [ h] ( = 85 ).
• Adjust brightness by using exposure compensation ( = 68 ).
• Adjust contrast by using i-Contrast ( = 72 , 120 ).
• Use AE lock or spot metering ( = 69 ).
Subjects look too bright, highlights are washed-out.
• Lower the flash and set the flash mode to [ !] ( = 29 ).
• Adjust brightness by using exposure compensation ( = 68 ).
• Use AE lock or spot metering ( = 69 ).
• Reduce the lighting on subjects.
Shots look too dark despite the flash firing ( = 32 ).
• Shoot within flash range ( = 205 ).
• Adjust brightness by using flash exposure compensation or changing the flash output
level ( = 86 , 94 ).
• Increase the ISO speed ( = 70 ).
Subjects in flash shots look too bright, highlights are washed-out.
• Shoot within flash range ( = 205 ).
• Lower the flash and set the flash mode to [ !] ( = 29 ).
• Adjust brightness by using flash exposure compensation or changing the flash output
level ( = 86 , 94 ).
White dots or similar image artifacts appear in flash shots.
• This is caused by light from the flash reflecting off dust or airborne particles.
Shots look grainy.
• Lower the ISO speed ( = 70 ).
• High ISO speeds in some shooting modes may cause grainy images ( = 53 ).
Subjects are affected by red-eye ( = 45 ).
• Set [Red-Eye Lamp] to [On] ( = 49 ) to activate the red-eye reduction lamp
( = 3 ) in flash shots. For best results, have subjects look at the red-eye reduction
lamp. Also try increasing the lighting in indoor scenes and shooting at closer range.
• Edit images using red-eye correction ( = 121 ).
Recording to the memory card takes too long, or continuous shooting
is slower.
• Use the camera to perform low-level formatting of the memory card ( = 154 ).
Shooting settings or FUNC. menu settings are not available.
• Available setting items vary by shooting mode. Refer to “Functions Available in Each
Shooting Mode”, “FUNC. Menu”, and “Shooting Tab Menu” ( = 193 – 201 ).
The Babies or Children icon does not display.
• The Babies and Children icons will not display if the birthday is not set in face
information ( = 39 ). If the icons still do not display even when you set the birthday,
re-register face information ( = 39 ), or make sure that the date/time are set
correctly ( = 151 ).
Cannot shoot planetarium stars well in [ ] mode.
• Shoot actual starry skies instead.
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
• Use the camera to format the memory card, or switch to a card that supports high-
speed recording. Note that even if the elapsed time display is incorrect, the length
of movies on the memory card corresponds to the actual recording time ( = 153 ,
205 ).
[ ] is displayed and shooting stops automatically.
The camera’s internal memory buffer filled up as the camera could not record to the
memory card quickly enough. Try one of the following measures.
• Use the camera to perform low-level formatting of the memory card ( = 154 ).
• Lower the image quality ( = 46 ).
• Switch to a memory card that supports high-speed recording ( = 205 ).