Canon PowerShot G16 - Manual (Page 14)

14
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
5 Close the cover.
z z Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
• For guidelines on how many shots or hours of recording can be saved on one
memory card, see “Number of 4:3 Shots per Memory Card” ( = 204 ).
Removing the Battery Pack and Memory Card
Remove the battery pack.
z z Open the cover and press the battery
lock in the direction of the arrow.
z z The battery pack will pop up.
Remove the memory card.
z z Push the memory card in until it clicks,
and then slowly release it.
z z The memory card will pop up.
Setting the Date and Time
Set the current date and time correctly as follows if the [Date/Time] screen
is displayed when you turn the camera on. Information you specify this way
is recorded in image properties when you shoot, and it is used when you
manage images by shooting date or print images showing the date.
You can also add a date stamp to shots, if you wish ( = 38 ).
1 Turn the camera on.
z z Press the power button.
z z The [Date/Time] screen is displayed.
2 Set the date and time.
z z Press the < q><r> buttons to choose an
option.
z z Press the < o><p> buttons or turn the
< 7> dial to specify the date and time.
z z When finished, press the < m> button.
3 Set the home time zone.
z z Press the < q><r> buttons or turn the
< 7> dial to choose your home time zone.