Canon LV 7490 - Manual (Page 16)

16
Installation
Connecting to a Computer
Cables used for connection
• VGA Cables (Mini D-sub 15 pin) *
• Audio Cables
(*One cable is supplied; other cables are not supplied with the projector.)
 Note:
• When the MIC function is set to Off in the Sound menu, the MIC function is disabled. (p 26)
• When MIC is set to On in Sound Menu, COMPUTER AUDIO IN 1, COMPUTER AUDIO IN 2 / MIC IN and AUDIO
IN(L/R) terminals can be connected at the same time. At this time, COMPUTER AUDIO IN 2 terminal as MIC
input. (p 26)
• Input sound to the COMPUTER AUDIO IN 1, COMPUTER AUDIO IN 2 / MIC IN terminals when using the
COMPUTER IN 2 / MONITOR OUT and the COMPUTER IN 1/ COMPONENT IN terminal as input.
• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.
• When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 / COMPONENT IN and not
the COMPUTER IN 2/ MONITOR OUT.
External Audio Equipment
Audio cable
(stereo)
Audio cable
(stereo)
Monitor Input Audio Output
COMPUTER 1/
COMPUTER 2
AUDIO IN (PC or MIC)
AUDIO OUT
(stereo)
Audio Input
VGA
cable
COMPUTER
IN 2
COMPUTER IN 1 /
COMPONENT IN
VGA
cable
Monitor Output Monitor Output
VGA
cable
MONITOR
OUT
This terminal is
switchable. Set up
the terminal as either
Computer input or
Monitor output.
(See Page 51.)
 Note:
Unplug the power cords of both the projector and external
equipment from the AC outlet before connecting cables.