Canon LV 7490 - Manual (Page 39)

39
VIDEO Input
VIDEO Input
Choose COMPUTER 1(COMPONENT) or COMPUTER 1 (SCART) by pressing the COMPONENT or
the COMPUTER 1 button on the remote controller.
Before using these buttons, correct input source should be selected through Menu operation as
described below.
1
Input Menu
2 Use the Point ▲▼ buttons to select
COMPUTER 1 and then press the Point ►
button.
Input Source Selection (COMPONENT, SCART)
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/S-VIDEO
IN/COMPONENT IN terminal
with a COMPONENT-VGA Cable,
select COMPONENT.
COMPONENT
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/S-VIDEO
IN/COMPONENT IN terminal
with a Scart-VGA Cable, select
SCART.
SCART
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select Input and then press the Point ►
button or the OK button.
 Note:
When the Auto input function is set to On 1 or On
2, the input signal will be searched automatically
(p.47).
COMPUTER 1 button
Remote controller
3 Use the Point ▲▼ buttons to select
COMPONENT or SCART and then press the
OK button.
COMPUTER 1 (ANALOG PC)
COMPUTER 1 (SCART)
COMPONENT button
COMPUTER 1 (COMPONENT)
Direct Operation
Menu Operation
Press the Point ▲▼ buttons
to select COMPONENT or
SCART.
INPUT button
Top Control