Canon LV 7490 - Manual (Page 24)

24
Basic Operation
Main Menu
For detailed functions of each menu, see “Menu Tree” on pages 68-69.
Main Menu
③ Image select
For both of computer and Video sources, used to select an image mode from among Presentation,
Standard, High contrast, Cinema, Blackboard(Green), Colorboard and User 1-4. (pp.34, 41)
④ Image adjust
For Computer source, used to adjust computer image [ Contrast, Brightness, Color temp.,
White balance (R/G/B), Sharpness, Gamma, Reset and Store]. (p.35)
For VIDEO source, used to adjust picture image [ Contrast, Brightness, Color, Tint, Color temp.,
White balance (R/G/B), Sharpness, Gamma, Noise reduction, Progressive, Reset and Store].
(pp.42-43)
② PC adjust
Select Auto PC, Fine sync, Total dots, Horizontal position, Vertical position, Current mode,
Clamp, Display area H, Display area V, Reset, Mode free and Store to adjust the parameters to
match with the PC input signal format. (pp.31-33)
⑤ Aspect
For Computer source, used to adjust size of the image [ Normal, Full, 16:9, Zoom, True, Custom,
Custom adj., Digital zoom +/– , Keystone, Ceiling, Rear and Reset]. (pp.36-37)
For VIDEO source, used to set size of image [ Normal, Full, 16:9, Zoom, Custom, Custom adj.,
Keystone, Ceiling, Rear and Reset]. (pp.44-45)
① Input
Used to select an input source from COMPUTER 1, COMPUTER 2, VIDEO or S-VIDEO. (pp.29,
39)
⑥ Sound
Used to adjust the volume or mute the sound or set configurations to the MIC functions (p.26).
⑧ Information
Display the input source information. (p.64)
⑩ Guide
The key operation is displayed.
⑦ Setting
Used to set the projector’s operating configurations. (pp.45-58)
⑨ Network
See user’s manual of “Network Set-up and Operation”.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
Sub-Menu